This installation guide may be downloaded in MS Word format.

Table of Contents

EverLink Client Installation Introduction

Windows® 95/98 and Windows NT® Installation

     System Requirements

     Installing EverLink

     Uninstalling EverLink

Solaris Installation

      System Requirements

     Installing EverLink

     Uninstalling EverLink

Mac® OS Installation

     System Requirements

     Installing EverLink

     Installing MRJ 2.0 from CD-ROM

     Uninstalling EverLink

IBM OS/2® Warp Installation

     System Requirements

     Installing EverLink

     Uninstalling EverLink

EverLink License Agreement

Warranty

EverLink and EntryGuard are trademarks of Anyware Technology, Inc.

Java and Solaris are registered trademarks of Sun Microsystems, Inc. Windows and Windows NT are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective holders.

©2000 Anyware Technology, Inc. All rights reserved.

EverLink Client Installation Introduction

This page will help you install Anyware Technology’s EverLink Client software. You have already chosen the platform that you are using in the registration process. Follow the steps below for that platform, and when you’ve completed the Client Installation, you’ll read how to access the Online Help Manual that will guide you through the Setup procedure and get you started using the EverLink Client.

Note: Please refer to the Solaris® installation guide to install EverLink Client on the Linux® platform.

Windows 95/98 and Windows NT Installation

System Requirements

Installing EverLink

This will guide you through the Installation of the EverLink Client. After you finish the Installation process, the next step will be the EverLink Client Setup.

1. After you have downloaded EverLink to the directory of your choice, double-click on the  ‘setup.exe’ icon (‘exe’ meaning executable) to begin installation, and your computer will start reading and unpacking this new package.
   
   

2. Welcome  Setup begins with the Welcome window. We recommend that you read all instructions and other materials in this and the upcoming windows. Click Next to go ahead.
   
   

3. Software License Agreement  By clicking on Yes, you agree to the terms set forth in the License Agreement. To install EverLink on your computer, you must click on “Yes” and accept this agreement.
   
   

4. Choose Destination Location EverLink will conveniently install itself in this directory - C:\Program Files\EverLink. To use EverLink’s automatic setting, just click on Next. You may also Browse to save EverLink under a directory of your choosing.
   
   

5. Select Program Folder EverLink will automatically arrange and add program icons. Click on Next and your computer will do the final installation.
   

Uninstalling EverLink

1.      Exit EverLink if it is running.

2.      On the Start menu, choose Settings and then Control Panel.

3.      Double-click the Add/Remove Programs icon.

4.      Select EverLink from the application list on the Install/Uninstall tab.

5.      Click the Add/Remove button.

6.      Follow the on-screen instructions to complete the uninstall.

Solaris Installation

System Requirements

Installing EverLink

1.      Start a terminal session and log in with your account name and password.

2.      Open either the Command tool or the Shell tool window.

3.      Locate the CD-ROM directory.

4.      Locate the installation file setup.sh on the CD-ROM. It is under the directory EverLink/solaris.

5.      In the directory with the installation file setup.sh, type in setup.sh.

6.    When Setup prompts you to choose a Java interpreter,
choose any listed interpreter that corresponds to version 1.1.7 of the JRE or JDK. If there is no appropriate interpreter listed, choose option 0 and enter the full path to the Java interpreter you want to use. Type in your choice and press Enter.

7.      Welcome The setup program will be extracted and the setup program’s Welcome window will appear. Click Next to proceed.

8.      README Information This gives the very latest product information. After reading click Next.

9.      Software License Agreement To install EverLink you must click in the “Accept all terms” checkbox, and then click Next.

10.   Choose Destination Location You can keep the automatic Destination Location, or click on Browse to choose your own directory. Click on Install to finalize the process.

When Installation is complete, you must run the Setup Wizard. To do so, in a Command Tool or Shell Tool window, under the installation directory, type in Setup, and then press Enter.

To refer to the Online Manual for further instructions, just click on Help at the top of any Setup Wizard window, or from your Start menu, under Programs, choose EverLink, and then EverLink Help. When you’ve opened the Online Manual, go to Getting Started With EverLink in the Contents frame at the left, and then choose Using the Setup Wizard.

Uninstalling EverLink

1.      Exit EverLink if it is running.

2.      Start a terminal session and log in.

3.      Change to the EverLink directory.

4.      Type the full path to the Java interpreter followed by –cp. uninstall. For example: /usr/jdk1.1.7/bin/jre -cp. uninstall.

5.      Follow the on-screen instructions to complete the uninstall.

The uninstall program does not remove files you have created with EverLink such as email or configuration files. To remove these files, change to the parent of the installation directory and use the rm command to recursively remove the entire directory tree. For example: rm -rf EverLink.

Mac OS Installation

System Requirements

Installing EverLink

1. Place the EverLink CD-ROM in the drive, open your hard drive and double-click the CD-ROM icon.
   
   
2. The EverLink window will appear on your screen. To install EverLink, double-click on the EverLink folder.
   
   
3. After you have opened the EverLink folder, double-click on the Mac folder and you will see the EverLink.hqx file.
   
   
4. Double-click on EverLink.hqx to decode the EverLink Installer.
   
   
5. Double-click the EverLink Installer icon and your computer will start reading and unpacking this new package.
   
   
6. Welcome  Setup begins with the Welcome window. We recommend that you read all instructions and other materials in this and the upcoming windows. Click Next to go ahead.
   
   
7. Software License Agreement  By clicking on Yes, you agree to the terms set forth in the License Agreement. To install EverLink on your computer, you must click on “Yes” and accept this agreement.
   
   
8. Choose Destination Location EverLink will conveniently install itself in this directory - C:\Program Files\EverLink. To use EverLink’s automatic setting, just click on Next. You may also Browse to save EverLink under a directory of your choosing.
   
   
9. Select Program Folder EverLink will automatically arrange and add program icons. Click on Next and your computer will do the final installation.  
   

Notes: If you have an older version of the MRJ, you must upgrade it to MRJ 2.0. The installer of MRJ 2.0 can be found on the CD-ROM under the folder jre/mac.

Installing MRJ 2.0 from CD-ROM

If you have already installed MRJ 2.0, please skip this section.

1.      Locate the MRJ20smi.hqx file on the CD-ROM. It is in the folder  mac that is inside the folder jre on the CD-ROM.

2.      Double-click on MRJ20smi.hqx to decode the MRJ 2.0.

3.      Then double-click MRJ 2.0.smi to mount the MRJ 2.0 Installer to the Desktop.

4.      Then double-click the MRJ 2.0 Installer icon.

5.      Follow the on-screen instructions to install MRJ 2.0.

When Installation is complete, you must begin the Setup Wizard. To refer to the Online Manual for further instructions, click on the Help button at the top of the first Setup Wizard window, or from your Start menu, under Programs, choose EverLink, and then EverLink Help. When you’ve opened the Online Manual, go to Getting Started With EverLink in the Contents frame at the left, and then choose Using the Setup Wizard.

Uninstalling EverLink

1.    Exit EverLink if it is running.

2.    Drag and drop the EverLink folder to the Trash.

IBM OS/2 Warp Installation

System Requirements

Installing EverLink

To install EverLink, create an icon for EverLink, then create an icon for the setup program, and follow these steps.

1. Start an OS/2 Window Session.
   
   

2. Change to the CD-ROM drive. For example, if the D drive is your CD-ROM drive: D:
   
   

3. Change to the OS2 directory by typing in cd EverLink\os2.
   
   
4. Type in instos2.
   
   
5. Welcome  Setup begins with the Welcome window. We recommend that you read all instructions and other materials in this and the upcoming windows. Click Next to go ahead.
   
   
6. Software License Agreement  By clicking on Yes, you agree to the terms set forth in the License Agreement. To install EverLink on your computer, you must click on “Yes” and accept this agreement.
   
   
7. Choose Destination Location EverLink will conveniently install itself in this directory - C:\Program Files\EverLink. To use EverLink’s automatic setting, just click on Next. You may also Browse to save EverLink under a directory of your choosing.
   
   
8. Select Program Folder EverLink will automatically arrange and add program icons. Click on Next and your computer will do the final installation.
   
   
9. If you want to create an icon on the desktop for EverLink, open the drives folder and find the directory where EverLink was installed. Create a shortcut to the EverLink.cmd file.
   
   
10. If you want to create an icon on the desktop for the EverLink Initializer, open the drives folder and find the directory where EverLink was installed. Create a shortcut to the setup.cmd file.

 
When Installation is complete, the Setup Wizard will automatically begin. To refer to the Online Manual for further instructions, click on the Help button at the top of the first Setup Wizard window, or from your Start menu, under Programs, choose EverLink, and then EverLink Help. When you’ve opened the Online Manual, go to Getting Started With EverLink in the Contents frame at the left, and then choose Using the Setup Wizard.

Uninstalling EverLink

1.      Exit EverLink if it is running.

2.      Find the directory EverLink was installed in via the Drives folder. Delete this entire directory and all files and directories inside it.

EverLink License Agreement

Software License Agreement ("SLA")

EverLink Client (SOFTWARE PRODUCT)

IMPORTANT-READ CAREFULLY

This is a legal agreement between you (either an individual or entity) and ANYWARE TECHNOLOGY, INC. (Licensor), the developer of the SOFTWARE PRODUCT identified above. The SOFTWARE PRODUCT includes computer software, in object code form only, the associated media, any printed materials, and any "online" or electronic documentation. By installing, copying, checking the AGREE box or otherwise using this SOFTWARE PRODUCT, you agree to be bound to the terms of this agreement. If you do not agree to the terms of this license agreement, Licensor is unwilling to license the SOFTWARE PRODUCT to you. In such event, you may not install, copy, or use the SOFTWARE PRODUCT and should contact Licensor for information on how to return the unused SOFTWARE PRODUCT for a refund. In order for you to be entitled to receive any future files, updates of upgrade notices, you must register the SOFTWARE PRODUCT by (i) signing and returning the registration postcard or (ii) completing an online registration. By registering the SOFTWARE PRODUCT, you agree with the terms and conditions written in this Software License Agreement and you also acknowledge that you are acquiring the software product for business purposes only.

1. Software. In connection with your purchase, download, or licensed use of the SOFTWARE PRODUCT, and subject to the terms of this SLA, Licensor grants you a personal, non-exclusive, non-transferable, restricted license to use the SOFTWARE PRODUCT on one (1) computer for each licensed copy purchased. You are allowed to make one (1) copy of the SOFTWARE PRODUCT only for backup purposes. If you have purchased multiple copies of the SOFTWARE PRODUCT, you may aggregate the number of separately purchased licenses.

2. Compliance with Third Party Licenses. The license granted under this SLA is for use of the SOFTWARE PRODUCT only. This SLA is not intended to counteract, annul, circumvent, obviate, avoid, evade or bypass any third party licensing arrangement for other software and/or hardware products that may be required. You are solely responsible for ensuring compliance with licensing agreements with any and all third party software and/or hardware providers.

3. Reverse Engineering, Decompilation, or Disassembly. You MAY NOT reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT or any portion thereof, or permit others to do so. Information relating to the SOFTWARE PRODUCT which is necessary to achieve interoperability with an independently created program is available from Licensor on request.

4. SOFTWARE PRODUCT Transfer. You MAY NOT sell, license, sublicense, rent, lease or otherwise transfer the SOFTWARE PRODUCT without the prior written consent of Licensor, unless to the extent expressly permitted by any applicable laws.

5. Termination. Without prejudicing any other rights, express or implied, the aforementioned license is granted under the conditions that the license will be terminated on immediate notice and you will lose all rights granted in the SOFTWARE PRODUCT if you violate a material obligation under this SLA. YOU MAY ALSO TERMINATE THIS SLA IF LICENSOR FAILS TO COMPLY WITH ITS TERMS AND CONDITIONS.

6. UPGRADES. If the SOFTWARE PRODUCT is an upgrade of a Licensor product, the upgrade and previous version are now considered the SOFTWARE PRODUCT and are expressly subject to this SLA.

7. PRODUCT SUPPORT. Licensor or its designated agents may provide limited support for the SOFTWARE PRODUCT. Please refer to the documentation included in the product package for additional information on support options.

8. COPYRIGHT. This SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. All right, title and interest in and to the SOFTWARE PRODUCT (including, but not limited to, any images, photographs, animation, video, audio, music, text, graphics and "applets" incorporated into the SOFTWARE PRODUCT and any component of the SOFTWARE PRODUCT, including, but not limited to, drivers, VxDs, utility programs, system software and objects), the accompanying printed materials, and any and all copies of the SOFTWARE PRODUCT, are owned by Licensor, its successors and assigns. You may not, or permit others to, copy any part of the SOFTWARE PRODUCT, except for allowed backup copies. All rights not specifically granted under this SLA are reserved by Licensor. You may not remove any copyright, trademark, proprietary rights, disclaimer or warning notice included on or embedded in the SOFTWARE PRODUCT.

9. U.S. GOVERNMENT RESTRICTED RIGHTS. The SOFTWARE PRODUCT and documentation are provided with RESTRICTED RIGHTS. If you are a U.S. government agency or unit, your duplication or disclosure by the United States Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Software—Restricted Rights at 48 CFR 52.227-19, as applicable.

10. Governing Law. This Agreement will be governed in all respects solely and exclusively by the laws of the State of California, U.S.A. without regard to conflict of laws principles. The United Nations’ Convention on the International Sale of Goods will not apply to this Agreement. For purposes of determination of the governing law, according to the provisions of this section, the parties acknowledge hereby that Licensor was the author of this Agreement and of the business transaction embodied in this SLA. Because some states/jurisdictions do not allow the chosen application of law and jurisdiction, the above regulation may not apply to you.

11. Arbitration. All disputes, controversies, or claims arising out of, relating to or in connection with this contract including the determination of the scope of the agreement to arbitrate, will be finally settled by arbitration in accordance with the Arbitration Rules of the United Nations Commission on International Trade Law (UNCITRAL), applicable at the time of submission of the dispute to arbitration. The American Arbitration Association, ("AAA") will be the Appointing Authority and will appoint a single arbitrator. The arbitration case will be administered by the AAA in accordance with its "Procedures for Cases Under the UNCITRAL Arbitration Rules" ("Rules"). The place of arbitration will be Los Angeles, California, and the exclusive language to be used for the arbitral proceedings will be English. Nothing herein will prevent a party, prior to appointment of the arbitrator, from making application to any court of competent jurisdiction, for any provisional remedy available at law or in equity. Such application for relief will not constitute a waiver of this agreement to arbitrate. Upon appointment, the arbitrator will have exclusive authority to order provisional or interim relief, except that any relief ordered by the arbitrator may be immediately and specifically enforced by a court otherwise having jurisdiction. The parties waive objection to venue and consent to the personal jurisdiction of the federal courts of Los Angeles, California, U.S.A. in any action to enforce this agreement to arbitrate or any order or award of the arbitrator, or for the provisional or interim remedies provided for in this Agreement. Discovery will be limited to written requests for the production of specific documents. The period for requesting documents will be 60 days commencing upon the day that the answer is due under the Rules.

The responding party will have 30 days to produce the requested documents by sending copies to the requesting party or its representative via a recognized international courier service. The parties will also voluntarily produce all documents that they intend to use at the arbitration hearing and a list of intended witnesses before the close of discovery subject to supplementation for purposes of rebuttal or good cause shown. The parties waive any right to seek any discovery not provided for in this Agreement irrespective of whether the laws of any country provide for different or additional discovery in international arbitration. The arbitrator will hold a pre-hearing conference within three days of the close of discovery and will schedule and hold the final hearing within 30 days of the close of discovery. EACH PARTY HERETO HEREBY AGREES THAT THE ARBITRATION PROCEDURE PROVIDED IN THIS AGREEMENT WILL BE THE SOLE AND EXCLUSIVE METHOD OF RESOLVING ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING IN CONNECTION WITH, OR OUT OF THIS AGREEMENT, OR OTHERWISE BETWEEN THE PARTIES TO THIS AGREEMENT.

Warranty

1. LIMITED WARRANTY. LICENSOR PROVIDES A LIMITED WARRANTY THAT THE SOFTWARE PRODUCT WILL WORK SUBSTANTIALLY IN ACCORDANCE WITH THE DOCUMENTATION FOR A PERIOD OF THIRTY (30) DAYS FROM THE DATE OF PURCHASE. LICENSOR DOES NOT WARRANT THAT YOUR USE OF THE SOFTWARE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. LICENSOR GIVES NO WARRANTY, EXPRESS OR IMPLIED, ON ANY THIRD PARTY VENDOR HARDWARE OR SOFTWARE OR SERVICES PROVIDED TO YOU OTHER THAN A PASS-THROUGH OF ANY SUCH THIRD PARTY’S WARRANTIES.

2. CUSTOMER REMEDIES. LICENSOR’S AND ITS SUPPLIERS’ ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY WILL BE, AT LICENSOR’S SOLE OPTION, EITHER (A) RETURN OF THE PRICE PAID, OR (B) REPAIR OR REPLACEMENT OF THE SOFTWARE PRODUCT THAT DOES NOT MEET THIS EXPRESS WARRANTY AND WHICH IS RETURNED TO LICENSOR WITH A COPY OF YOUR RECEIPT. THIS WARRANTY IS VOID IF FAILURE OF THE SOFTWARE PRODUCT HAS RESULTED FROM ACCIDENT, ABUSE, OR MISAPPLICATION WHICH OCCUR AFTER DELIVERY. ANY REPLACEMENT SOFTWARE PRODUCT WILL BE WARRANTED FOR THE REMAINDER OF THE ORIGINAL WARRANTY PERIOD OR THIRTY (30) DAYS, WHICHEVER IS LONGER.

3. NO OTHER WARRANTIES. EXCEPT FOR THE EXPRESS WARRANTY IN PARAGRAPHS 1 AND 2 OF THIS WARRANTY, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LICENSOR AND ITS SUPPLIERS DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT WITH REGARD TO THE SOFTWARE PRODUCT AND THE ACCOMPANYING WRITTEN MATERIALS.

4. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. SUBJECT TO PARAGRAPHS 2 AND 3 OF THIS WARRANTY AND ONLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR OR ITS SUPPLIERS BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS HOWSOEVER ARISING WHETHER IN CONTRACT, TORT OR OTHERWISE. LICENSOR’S AND ITS SUPPLIERS’ ENTIRE LIABILITY IN CONTRACT, TORT OR OTHERWISE UNDER ANY PROVISION OF THIS AGREEMENT WILL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE SOFTWARE PRODUCT. NOTHING IN THIS AGREEMENT WILL LIMIT LICENSOR’S LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM ITS NEGLIGENCE (OR THAT OF ITS EMPLOYEES) OR LICENSOR’S LIABILITY IN THE TORT OF DECEIT.

5. ULTRAHAZARDOUS ACTIVITIES. THE SOFTWARE PRODUCT IS NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE IN ANY ENVIRONMENT IN WHICH THE FAILURE OF THE SOFTWARE PRODUCT COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE, SUCH AS IN THE DESIGN OR OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE SUPPORT MACHINES, OR WEAPONS SYSTEMS OR IN THE ON-LINE CONTROL OF EQUIPMENT IN ANY HAZARDOUS ENVIRONMENT REQUIRING FAIL-SAFE PERFORMANCE ("ULTRAHAZARDOUS ACTIVITIES") TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. LICENSOR AND ITS SUPPLIERS SPECIFICALLY DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR ULTRAHAZARDOUS ACTIVITIES. YOU REPRESENT AND WARRANT TO LICENSOR THAT YOU WILL NOT USE, OR ALLOW OTHERS TO USE, THE SOFTWARE PRODUCT FOR SUCH PURPOSES.

6. LIMIT OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE FOREGOING LIMITATION OF LIABILITY WILL APPLY REGARDLESS OF THE CAUSE OF ACTION UNDER WHICH DAMAGES ARE SOUGHT, INCLUDING, WITHOUT LIMITATION, BREACH OF CONTRACT, STRICT LIABILITY, NEGLIGENCE OR OTHER TORT. IN NO EVENT WILL LICENSOR EVER BE LIABLE UNDER THIS SLA FOR ANY AMOUNTS IN EXCESS OF THE AMOUNTS PAID TO IT BY YOU.

7. EXPORT COMPLIANCE AND FOREIGN RESHIPMENT LIABILITY. THIS AGREEMENT IS EXPRESSLY MADE SUBJECT TO ANY LAWS, REGULATIONS, ORDERS OR OTHER RESTRICTIONS OF EXPORT FROM THE UNITED STATES OF AMERICA of SOFTWARE OR BUNDLED PRODUCTS WHICH MAY BE IMPOSED FROM TIME TO TIME BY THE GOVERNMENT OF THE UNITED STATES OF AMERICA. NOTWITHSTANDING ANYTHING CONTAINED IN THIS AGREEMENT TO THE CONTRARY, the LICENSEE SHALL NOT EXPORT OR REEXPORT, DIRECTLY OR INDIRECTLY, ANY RSA SOFTWARE OR BUNDLED PRODUCTS OR INFORMATION PERTAINING THERETO TO ANY COUNTRY TO WHICH SUCH EXPORT OR REEXPORT IS RESTRICTED OR PROHIBITED, OR AS TO WHICH SUCH GOVERNMENT OR ANY AGENCY THEREOF REQUIRES AN EXPORT LICENSE OR OTHER GOVERNMENTAL APPROVAL AT THE TIME OF EXPORT OR REEXPORT WITHOUT FIRST OBTAINING SUCH LICENSE OR APPROVAL. BOTH PARTIES WILL COMPLY WITH ALL SUCH APPLICABLE LAWS, REGULATIONS, ORDERS OR OTHER RESTRICTIONS.